Another option: Monitoring of up to 16 axes and spindles without sensor
SPECTRA™ digital drive data DDD represent an excellent add-on to the existing spectrum of Montronix process monitoring systems. Such monitoring can be based exclusively on digital drive data, but can also be set up with external sensors. Up to 16 drives or axes can be monitored with the help of digital drive data. In addition to DDD, conventional sensors can be used, offering an extensive and exact differentiation of processes.
All machine types can be monitored via digital drive data, provided it is an „open“ CNC control by Siemens, Fanuc, or Indramat.
The DDD bus data are read via profibus or interbus, with the SPECTRA™ -PCI card providing the PC-contained version. SPECTRA™ BL, SL, and GL systems continue to be external solutions, installed in the respective control cabinets. The machine manufacturer can thus install the systems individually and quickly, enabling the final customer to retrofit and upgrade them without any difficulties.
Setting up the bus data follows the same principles as with all other sensors. The procedures to set up parameters remains the same. The user will decide which of the measured drives provides the most significant signal. Setting the monitoring parameters is then performed automatically.
Specifications are control dependent
The requirements for collecting digital drive data as described herein are based on information provided by the control manufacturers and derived from already existing applications. For questions, please contact your nearest Montronix branch.
DDD for Siemens CNC controls:
In combination with Siemens controls you can either use a SPECTRA™ PCI card, a SPECTRA™ BL, SL or a GL. All of these systems use the 32-bit drive data imported via profibus for evaluation. The extremely high sensitivity of the monitoring unit guarantees optimal monitoring. Software versions up to NCU Version 6.4 require the technology card to provide the necessary cycles.
|Drive Hardware||SIMODRIVE 611D|
SINUMERIK 840D Technology card required up to bis NCU V6.4
Rev.05.03.06 (NCU_05.03.18) or 04.04.11 (NCU_04.04.37) and higher
|Software-Options||PROFIBUS License for tool and process monitoring MLFB-6FC5251-0AE71-0AA0|
DDD for Fanuc controls:
In case of Fanuc controls, the SPECTRA™ PCI card can be directly installed in the PC or added as PCI extension. Alternatively, an external SPECTRA™ BL, SL or GL system can be used. All of these systems use the 16-bit drive data imported via profibus for evaluation. High sensitivity results in superior monitoring performance.
|Drive Hardware||Digital drives
|Control Hardware||CNC 16i, CNC 18i, and CNC21i mit Profibus adapter|
|Control Software||No restrictions known
|Software-Options||« Abnormal Load Detection » License
DDD for Indramat CNC controls:
In combination with Indramat controls, you can either use a SPECTRA™ PCI card or a SPECTRA™ BL, SL, or GL. All of these systems use the 32-bit drive data imported via interbus for evaluation. The extremely high sensitivity of the monitoring unit guarantees optimal monitoring.
|Drive Hardware||DIAX 04 - based
|Control Hardware||-Indramat MTC200 and higher
-Profibus or Interbus
|Control Software||Rev. 19 and higher
-Profibus or Interbus