montronix.com - Home

Start Productos SistemasAmplificadores

Amplifier

TSFA2-DGM

The Montronix TSFA2-DGM-xx is a 2-channel force amplifier to be used in connection with Montronix force sensors. A Montronix SPECTRA™ central unit controls the TSFA2-DGM-xx via aserial interface. As a result, characteristics for amplification, filters, and rms values can be individually set for each channel, optimizing the amplifier's adjustment to each new tool. For signal evaluation within the processing unit, the TSFA2-DGM-xx splits force signals in its static and dynamic parts. This function renders the amplifier ideal for long cuts and fast processing changes.

Type: digital force amplifier
Output signals: OC up to 10 V
Amplification: 1, 2, 4, 8, 10, 20, 40, 80, 100, 200, 400, 800
Voltage supply: DC ±15V
Power supply: 175mA@+15V, -19mA@-15V
Dimensions: (WHD in mm, ca.) 35 x 176 x 83
Connections: PG9 / sensor specific
Housing: Aluminum
Weight: ca. 550 g
Temperature range:
Operating: 0 bis 60°C,
Storage: -40 bis 100°C
Relative humidity: 0 bis 95%, no condensation
Protection class: IP66
Mounting: 2x M4 bolts

Lathes
Processing centers
Grinding machines
Transfer Lines
Special machines
Compression / Riveting

TSSG1-DGM

The single-channel Montronix TSSG1-DGM force amplifier is used in combination with a Montronix RetroBoltSG-Mxx force sensor. The Montronix SPECTRA™ central unit controls the TSSG1-DGM via a serial interface. Amplification, filter and time constant can hereby be set individually. These settings are individually available for each tool, rapid feed function, and tool change. There are two analog signal outputs. In order to be evaluated by the processor unit, the TSSG1-DGM amplifier divides the force signals into a static and a dynamic part. Since the sensor is really based on strain gauge measurements, this specific Montronix sensor technology is especially suited for long cuts and rapid process changes.

Type: digital force amplifier
Gain error: ±2%:
Output signals: 0 .. 10V: dynamic part (RMS) ±10V: RAW and DIAG output
Amplification: 1, 2, 4, 8, 10, 20, 40, 80, 100, 200, 400, 800
Voltage supply: DC ±15V
Power requirements: 90mA @+15V DC, -20mA @ -15V DC
Dimensions: (WHD in mm, ca.) 153 x 35 x 65
Connections: PG9 / sensor specific
Housing: Aluminum
Weight: ca. 320 g
Temperature range:
Operating: 0 bis 60°C,
Storage: -40 bis 100°C
Relative humidity: 0 bis 95%, no condensation
Protection class: IP66
Mounting: using M4 bolts on an even surface

Turning centers
Machining centers
grinding centers
Transfer lines
Custom machine
Presses / Riveting machines

TSVA2-DGM

The TSVA2-DGM is a 2-channel vibration amplifier that is used in connection with our broad bandsensor BV100 A Montronix SPECTRA™ controls the TSVA2-DGM via an RS485 interface. This enables you to set individual values concerning amplification, filtering, and rms value for each channel.These settings are available for each tool, for the functions "rapid feed" and "turret index". The TSVA2-DGM features one analog output per channel. You can connect up to two BV100 broadband sensors to the TSVA2-DGM. When employing two sensors, however, you can only use either the vibration or the acoustic emissions (AE) component for any one sensor.

Output signal: 0 to 10 V DC
Gain error: ± 2 %
Power provided to sensor: ±15 V DC
Amplifier power requirements: 130 mA@+15 V, -80 mA @-15V
Current provided to sensor: 4 mA constant current
Mounting: 2 M4 screws
Dimensions: (HxLxD in mm, ca.) 35 x 176 x 83
Housing: Aluminum
Weight ca. 550 g
Protection class: IP66 When connected to sensor and amplifier cables.
Temperature range:
Operating 0 - 60 cC
Storage -40 - 90 cC
Humidity: 0 to 95 %, no condensation
Certification, in connection with Montronix systems: CE, CSA, ETL

Tool monitoring (tool breakage, missing tool)
Collision monitoring
Measuring vibrations and oscillations for detection of process malfunction
Detection of tool / work piece contact