FS13CXK-x-ICA

FS13CXK-x-ICATechnical specificationsApplications

The Montronix force sensors of the series FS1xCXK-x-ICA are piezoelectric force transducers, which are available as single axis or three axes sensors in different types (cable outlet straight/angled). A high sensitivity and a low drift characterize the FS1xCXK-x-ICA sensors.

Equipped with an integrated charge amplifier (ICA) it affords a low-impedance signal output. The mounting will be realized within milling pockets or between force platforms, which are located within the machine structure directly and thereby in the load path. The FS1xCXK-x-ICA sensors will be used particularly for the detection of collisions, missing tools, and tool breakages.

The FS1xCXK-x-ICA force sensors are excellent suited for industrial monitoring applications due to its compact design, the fixing with only one bolt, the robust construction, and selectable measuring ranges.

Type Description
Dimensions (HxBxT in mm) 10 x 57 x 25
Weight approx. 30 g
Housing stainless Steel
Protection class IP67
Temperature range Operation 0 bis 60°C / Storage -10 bis 70 °C
Relative humidity 0 to 95 % non-condensing
Cable Cable 7-wire with internal shielding, PUR (polyurethane) covering, approx. 5m long
Certification CE, CSA, ETL
Voltage supply ± 15 V DC
Outout voltage ± 5 V DC
Output impedance <100 Ω max.
Reset time < 1 ms
Signal noise (< 1 kHz): < 2 mV effektiv
Current consumption single axis sensor: approx. 7 mA
three axis sensor: approx. 11 mA
Sensivity, 2 selectable ranges Range I (low gain): Fx,Fy: 500 N/V, Fz: 1000 N/V
Range II (high gain): Fx,Fy: 100 N/V, Fz: 200 N/V
Linearity ≤ ±1 % FSO
Hysteresis ≤ ±1 % FSO
Overload capability 6 kN bei 25 kN preload

Application

  • Detection of collisions
  • Tool monitoring (tool breakage, missing tool)
  • Overload detection

Field of Application

  • On tool machines (especially on lathes, press and broaching machines) within all industrial areas